* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless CSP LED strip, 10w per metre, IP20
CSP (chip scale package) LEDs sit so close together on this strip that the light reads as a single, even line rather than a row of dots. It is a neat way to get a clean finish in shallow profiles, under shelves and inside joinery where the strip might be seen.
At 10w per metre it is a lower power, efficient choice for cabinetry, kitchen kickboards, wardrobes and architectural details. The slim 8mm width fits compact aluminium profiles, and you can choose warm, cool or daylight white to suit the room.
Key features
- 10w per metre, 1000 to 1035 lumens per metre
- CSP chips for smooth, dot free light
- Choice of 3000k, 4000k or 5500k
- 120° beam angle, CRI over 80
- 8mm wide, 2mm high
- Cut points every 50mm
- 24v DC, dimmable
- Sold per metre or as a 30 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
1000 lumens |
Living areas, bedrooms, wardrobes |
| 4000k Cool White |
1035 lumens |
Kitchens, laundries, bathrooms |
| 5500k Bright Daylight |
1030 lumens |
Garages, workshops, retail display |
Choosing a driver
Allow 10w for every metre of strip and add about 20% headroom. As a worked example, a 5 metre run draws 50w, so it needs a 24v driver of at least 60w. For bigger installs, split the strip into separate runs, each with its own feed. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
We recommend mounting this strip in an aluminium profile. The profile draws heat away from the LEDs, protects the strip and extends its life. Choose a profile at least 9mm wide inside to suit the 8mm strip, and add a diffuser for the softest line of light.
IP20 rated for dry indoor locations only.
