* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Tunable white COB LED strip, 14.4w per metre, IP54
Shift this strip from warm 3000k to bright 5500k with a CT controller, and get a clean, dot free line of light from 608 COB chips per metre. An IP54 coating adds protection against dust and light moisture.
That makes it a good match for bathrooms, laundries, vanities and sheltered outdoor spots where you still want adjustable white light. It cuts to length, runs up to 5 metres from one feed and is sold per metre or as a 10 metre roll.
Key features
- Adjustable white from 3000k to 5500k
- 608 COB chips per metre for a smooth, dot free line
- 14.4w per metre, 800 lumens per metre
- CRI over 90
- 120° beam angle
- 10mm wide, 3mm high
- 24v DC, maximum 5 metre run, dimmable
- IP54 rated
- Needs a compatible CT controller
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Adjustable white, from warm to cool |
24v driver plus a compatible CT controller |
Bathrooms, vanities, living areas |
| One fixed white of your choice |
24v driver plus a compatible CT controller set to that tone |
Laundries, shelving, covered areas |
Choosing a driver and controller
Allow 14.4w for every metre of strip and add about 20% headroom. A full 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. Your CT controller must also be rated for the full load of the run. The 10 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors, use a weatherproof IP66 or IP67 driver and keep the controller under cover.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface for warranty purposes, and an aluminium profile does that job while protecting the strip and extending its life. Choose a profile at least 11mm wide inside to suit the 10mm strip, and add a diffuser for the softest line of light. Every cut end must be resealed with an end cap and silicone to keep the IP54 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP54 rated, suitable for damp and sheltered locations such as bathrooms, laundries and covered outdoor areas.
