* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Dotless COB RGB LED strip, 15w per metre, IP20
This indoor COB RGB strip mixes 480 chips per metre into one smooth band of colour, so there are no visible dots even in shallow profiles. It is ideal for TV walls, bedheads, kickboards, shelving and games rooms.
Run it from an RGB controller to set any colour or a changing scene. It comes by the metre for custom lengths or as a 30 metre roll for bigger jobs.
Key features
- COB construction for smooth, dot free colour
- Full RGB colour, dimmable with an RGB controller
- 15w per metre, 500 lumens per metre
- 480 chips per metre
- CRI greater than 80
- 120° beam angle
- Cut points every 50mm
- 24v DC, maximum 5 metre run
- 10mm wide, 2mm high, 3M double sided tape backing
- Sold per metre or as a 30 metre roll
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
Non dimmable 24v driver plus an RGB controller |
Media walls, games rooms, bars |
| One fixed colour |
Non dimmable 24v driver plus an RGB controller set to one colour |
Bedheads, shelving, accent lighting |
| White (all channels on) |
Non dimmable 24v driver plus an RGB controller |
Soft background glow |
Choosing a driver and controller
Allow 15w for every metre of strip and add about 20% headroom. A full 5 metre run draws 75w, so it needs a 24v driver of at least 90w, which in practice means a 100w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 30 metre roll is supplied as one reel, so plan your runs before cutting. Colour and dimming are handled by the RGB controller, so a standard non dimmable 24v driver is the right match. The controller must be rated for the full load of the run.
Mounting and heat
This strip must be installed on an aluminium profile or heat sink to keep the warranty valid. The profile protects the strip, draws heat away and extends its life, and a diffuser smooths the colour even further. Choose a profile at least 11mm wide inside to suit the 10mm strip. Ambient temperature range is minus 20°C to 50°C.
IP20 rated for dry indoor locations only.
