* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Micro LED strip, 4mm wide, 19.2w per metre, 3000k
This is the higher output version of our 4mm micro strip, putting 19.2w per metre into a board narrow enough to hide almost anywhere. 240 chips per metre give a strong, even warm white line from a very small footprint.
Use it in hospitality fitouts, living areas, shelving and display joinery where space is tight but you still want real brightness. 25mm cut points help with precise custom lengths.
Key features
- Only 4mm wide and 2mm high
- 19.2w per metre, 1500 lumens per metre
- 240 LED chips per metre
- CRI greater than 80
- 120° beam angle
- Cut points every 25mm
- 24v DC, maximum 5 metre run
- Dimmable
- Sold per metre or as a 30 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
1500 lumens |
Hospitality, living areas, display lighting |
Choosing a driver
Allow 19.2w for every metre of strip and add about 20% headroom. A full 5 metre run draws 96w, so it needs a 24v driver of at least 116w, which in practice means a 150w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid. At 19.2w per metre on a 4mm board it needs that heat path, so an aluminium profile at least 5mm wide inside is the best option, with a diffuser for a softer line.
IP20 rated for dry indoor locations only.
