* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Side bend chasing RGB LED strip, 20w per metre, IP67
This strip does more than change colour: its chasing effect sends moving colour along the run, adding animation to outlines, signage and feature lighting. 200 LEDs per metre sit inside a side bend housing, so it curves smoothly sideways along horizontal lines and shapes.
The IP67 housing means it works indoors and out, from shopfronts and bar edges to building outlines and outdoor entertaining areas. It is sold by the metre or as a 20 metre roll.
Key features
- RGB chasing effects for moving colour
- Side bend design, curves sideways along a flat surface
- 20w per metre
- 200 LEDs per metre
- 120° beam angle
- 24v DC
- Dimmable
- IP67 for indoor and outdoor use
- 12mm wide, 17mm high
- Sold per metre or as a 20 metre roll
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Chasing colour effects |
24v driver plus a controller that supports chasing effects |
Signage, shopfronts, building outlines |
| Static colour |
24v driver plus a compatible controller |
Bars, feature lighting, entertainment areas |
Choosing a driver and controller
No maximum run length is published for this strip, so size the driver by load: allow 20w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 100w and needs a 24v driver of at least 120w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Your chasing controller handles colour and dimming, and it must be rated for the full load of the run. In damp or outdoor locations, use a weatherproof IP66 or IP67 driver and controller, or keep them under cover.
Mounting and outdoor use
This is a side bend strip, so it bends sideways rather than up and down, and it is best fixed with mounting clips or a mounting channel. Keep curves gentle so the internal strip is not stressed. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for indoor and outdoor use.
