* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
COB LED strip, 25w per metre, 1920 chips per metre
With 1920 COB chips packed into every metre, this strip gives a continuous, dot free line of light at up to 3170 lumens per metre. That is enough output for the strip to be the main light source in a room, not just an accent, and it still looks clean where the strip itself can be seen.
Use it in coves, bulkheads, high ceilings, long joinery runs and indirect lighting that needs to light a whole space. CRI above 90 keeps timber, stone and skin tones natural. Choose warm 3000k or cool 4000k, cut to length or as a 30 metre roll.
Key features
- 25w per metre, 2900 to 3170 lumens per metre
- 1920 COB chips per metre for a smooth, dot free line
- CRI above 90 for accurate, natural colour
- 120° beam angle
- 15mm wide, 2mm high
- Cut points every 20.67mm
- 24v DC, maximum 4 metre run
- Dimmable
- Double sided tape backing
- 3 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
2900 lumens |
Living areas, bedrooms, hospitality |
| 4000k Cool White |
3170 lumens |
Kitchens, laundries, workspaces, retail |
Choosing a driver
Allow 25w for every metre of strip and add about 20% headroom. A full 4 metre run draws 100w, so it needs a 24v driver of at least 120w, which in practice means a 150w driver. For longer installations, split the strip into runs of 4 metres or less and feed each run separately. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
At 25w per metre this strip runs hot, and the warranty requires it to be installed on an aluminium heat dissipating surface. An aluminium profile is the neatest way to do that: it draws heat away from the chips, protects the strip and extends its life, and a diffuser gives the softest line of light. Choose a profile at least 16mm wide inside to suit the 15mm strip.
IP20 rated for dry indoor locations only.
