* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
High density COB LED strip, 30w per metre, 3072 chips per metre
3072 COB chips per metre on a 20mm wide tape create a seamless band of light with up to 3570 lumens per metre. It is bright enough to light a room indirectly from a cove or bulkhead, and the continuous COB line means no dots or hotspots, even in a shallow profile.
It is a strong fit for commercial fitouts, high ceilings, retail displays, large joinery and feature walls where you need serious output from a slim line. CRI above 90 keeps finishes and merchandise looking true. Choose 3000k or 4000k, cut to length or as a 30 metre roll.
Key features
- 30w per metre, 3460 to 3570 lumens per metre
- 3072 COB chips per metre for a seamless, dot free line
- CRI above 90 for accurate, natural colour
- 120° beam angle
- 20mm wide, 2mm high
- Cut points every 15.5mm
- 24v DC, maximum 3 metre run
- Dimmable
- Double sided tape backing
- 3 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
3460 lumens |
Living areas, hospitality, feature walls |
| 4000k Cool White |
3570 lumens |
Retail, offices, kitchens, workspaces |
Choosing a driver
Allow 30w for every metre of strip and add about 20% headroom. A full 3 metre run draws 90w, so it needs a 24v driver of at least 108w, which in practice means a 150w driver. For longer installations, split the strip into runs of 3 metres or less and give each run its own feed. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
At 30w per metre this strip produces a lot of heat, and the warranty requires it to be installed on an aluminium heat dissipating surface. Mount it in an aluminium profile to draw heat away from the chips, protect the strip and extend its life, and add a diffuser for the softest finish. Choose a profile at least 21mm wide inside to suit the 20mm strip.
IP20 rated for dry indoor locations only.
