* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Micro LED strip, 4mm wide, 5500k, 24v
Bright, clean 5500k daylight from a strip just 4mm wide. It hides easily in narrow and concealed spots without giving up output, putting 860 lumens on every metre.
Use it under cabinets, inside display cases, along workbenches and in shallow shelf channels. It suits DIY projects and professional installs alike, sold by the metre or as a 30 metre roll.
Key features
- Just 4mm wide and 2mm high
- 9.6w per metre, 860 lumens per metre
- 180 LEDs per metre
- CRI above 80
- 120° beam angle
- 24v DC, maximum 5 metre run, dimmable
- Adhesive backing
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Daylight |
860 lumens |
Under cabinet lighting, workspaces, displays |
Choosing a driver
Allow 9.6w for every metre of strip and add about 20% headroom. A full 5 metre run draws 48w, so it needs a 24v driver of at least 58w, which in practice means a 60w driver. For longer installations, split the strip into runs of 5 metres or less and feed each run separately. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
To keep the warranty valid, this strip must be mounted on an aluminium surface that draws heat away from the LEDs, and an aluminium profile is the simplest way to do it. The profile also protects the strip and extends its life, and a diffuser gives the softest line of light. Choose a profile at least 5mm wide inside to suit the 4mm strip. Narrow profiles made for micro strip keep the install tidy in thin shelf edges and joinery.
IP20 rated for dry indoor locations only.
