* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Long run LED strip, 14.4w per metre, 5500k, CRI 90
Get up to 10 metres from a single feed with this 24v daylight strip, so long benches, shelving and ceiling coves need fewer drivers and connections. CRI over 90 keeps colours true under crisp 5500k light.
With 1320 lumens per metre it is well suited to kitchens, garages, workshops and retail displays. It cuts every 100mm and fixes with 3M double sided tape.
Key features
- 14.4w per metre, 1320 lumens per metre
- 60 x 2835 LEDs per metre
- 5500k bright daylight, CRI over 90
- 120° beam angle
- 10mm wide, 2mm high
- Cut points every 100mm
- 24v DC, maximum 10 metre run
- 3M double sided tape
- 3 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Bright Daylight |
1320 lumens |
Garages, workshops, retail, task lighting |
Choosing a driver
Allow 14.4w for every metre of strip and add about 20% headroom. A full 10 metre run draws 144w, so it needs a 24v driver of at least 173w, which in practice means a 200w driver. A 5 metre run draws 72w and suits a 100w driver. For longer installations, split the strip into runs of 10 metres or less and feed each run separately.
Mounting and heat
We recommend mounting this strip in an aluminium profile, which draws heat away from the LEDs, protects the strip and extends its life. Choose a profile at least 11mm wide inside to suit the 10mm strip, and add a diffuser for the softest line of light. The 3M double sided tape holds it in place.
IP20 rated for dry indoor locations only.
