* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
LED strip, 19.2w per metre, 5500k daylight, IP20
This daylight strip uses 240 SMD 3528 LEDs per metre to give bright, uniform light along its full length. Cut points every 50mm let you size it neatly to benches, shelving and display cabinets.
The crisp 5500k colour is made for task lighting, retail displays and work surfaces where clarity is the priority. Buy it by the metre or as a 30 metre roll.
Key features
- 19.2w per metre, 1720 lumens per metre
- 240 SMD 3528 LEDs per metre
- CRI greater than 80
- 120° beam angle
- Cut points every 50mm
- 24v DC
- Dimmable
- 2mm high, 3M double sided tape backing
- Sold per metre or as a 30 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 5500k Daylight |
1720 lumens |
Task lighting, retail displays, work surfaces |
Choosing a driver
No maximum run length is published for this strip, so size the driver by load: allow 19.2w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 96w and needs a 24v driver of at least 116w, which in practice means a 150w driver. Split longer installs into separate runs, each with its own feed. The 30 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface to keep the warranty valid. An aluminium profile protects the strip, draws heat away and extends its life, and a diffuser softens the line. Check the strip width with us before choosing a profile.
IP20 rated for dry indoor locations only.
