* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Very high output LED strip, 46w per metre, 3000k warm white
Warm 3000k light at 4140 lumens per metre lets this wide strip light a whole room from a cove or bulkhead while keeping a relaxed, comfortable feel. 252 LEDs per metre spread across the 39mm tape give an even band of light.
It suits large living areas, hospitality venues, high ceilings and commercial spaces that want warmth without giving up brightness. Sold per metre or as a 5 metre roll.
Key features
- 46w per metre, 4140 lumens per metre
- 252 x 2835 LEDs per metre
- CRI above 80
- 120° beam angle
- 39mm wide, 2mm high
- Cut points every 83mm
- 24v DC
- Dimmable
- 3M double sided tape backing
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
4140 lumens |
Large living areas, hospitality, high ceilings |
Choosing a driver
Allow 46w for every metre of strip and add about 20% headroom. A 5 metre run draws 230w, so it needs a 24v driver of at least 276w, which in practice means a 300w driver. No maximum run length is published for this strip, so split longer installs into separate runs, each with its own feed. The 5 metre roll is supplied as one reel, so plan your runs before cutting. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
At 46w per metre this strip runs hot, and the warranty requires it to be installed on an aluminium heat dissipating surface. Mount it in an aluminium profile to draw heat away from the LEDs, protect the strip and extend its life, and use a diffuser for a softer finish. Choose a profile at least 40mm wide inside to suit the 39mm strip.
IP20 rated for dry indoor locations only.
