* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
RGB colour changing LED strip, 7.2w per metre, 12v, IP67
This IP67 rated RGB strip takes colour lighting outdoors. 30 multicolour LEDs per metre can show any colour or run changing effects through an RGB controller, rain or shine.
It suits outdoor entertaining areas, deck and step edges, garden features, pool surrounds and facades, as well as wet areas indoors. The strip is cut to the length you order.
Key features
- Full RGB colour
- 7.2w per metre, 585 lumens per metre on white
- 30 x 5050 RGB LEDs per metre
- 120° beam angle
- 12mm wide, 4mm high
- Cut points every 100mm
- 12v DC, maximum 5 metre run
- Dimmable
- IP67 rated
- 3M double sided tape backing
- 3 year replacement warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
12v driver plus an RGB controller |
Outdoor entertaining, decks, pool surrounds |
| One fixed colour |
12v driver plus an RGB controller set to that colour |
Garden features, facades, accent colour |
| White (all channels on) |
12v driver plus an RGB controller |
General glow when colour is not needed |
Choosing a driver and controller
Allow 7.2w for every metre of strip and add about 20% headroom. A full 5 metre run draws 36w, so it needs a 12v driver of at least 44w, which in practice means a 60w driver. Your RGB controller must also be rated for the full load of the run. For longer installs, split the strip into runs of 5 metres or less and give each run its own feed. Outdoors, use a weatherproof IP66 or IP67 driver and controller or keep them under cover.
Mounting and outdoor use
Mount the strip in an aluminium profile or channel, which protects it from knocks and sun and helps it last, with at least 13mm inside to suit the 12mm strip. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
