* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
IP67 LED strip, 14.4w per metre, 280 LEDs per metre, 4000k
This neutral white strip uses a dense 280 LEDs per metre for even, uniform light, sealed for weather protection. Cut points every 25mm make it easy to fit exact lengths inside or out.
4000k gives clean, natural white light for outdoor kitchens, bathrooms, laundries, covered work areas and commercial spaces, and the IP67 rating means rain and splashes are not a problem.
Key features
- 14.4w per metre, 1300 lumens per metre
- 280 LEDs per metre for smooth, dot free light
- 4000k cool white, CRI over 80
- 120° beam angle
- 13mm wide, 4.5mm high
- Cut points every 25mm
- 24v DC, dimmable
- IP67 rated
- Sold per metre or as a 20 metre roll
- 3 year warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 4000k Cool White |
1300 lumens |
Outdoor kitchens, bathrooms, work areas |
Choosing a driver
Allow 14.4w for every metre of strip and add about 20% headroom. As a worked example, a 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For bigger installs, split the strip into separate runs, each with its own feed. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors or in wet areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim the strip, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and heat
This strip must be installed on an aluminium heat dissipating surface for warranty purposes, and an aluminium profile is the easiest way to do that. The profile draws heat away from the LEDs, protects the strip and extends its life. Choose a profile at least 14mm wide inside to suit the 13mm strip, and add a diffuser for the softest line of light. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
