* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Long run LED strip, 14.4w per metre, 3000k, CRI 90
This 24v strip runs up to 10 metres from one feed, which means fewer power points and less cabling to hide on long joinery and cove runs. CRI over 90 gives warm white light that keeps timber, stone and fabrics looking natural.
At 1200 lumens per metre it suits kitchens, living areas, bedrooms and hospitality spaces. The slim 10mm strip fixes with 3M tape and cuts every 100mm.
Key features
- 14.4w per metre, 1200 lumens per metre
- 60 x 2835 LEDs per metre
- 3000k warm white, CRI over 90
- 120° beam angle
- 10mm wide, 2mm high
- Cut points every 100mm
- 24v DC, maximum 10 metre run
- 3M double sided tape
- 3 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
1200 lumens |
Kitchens, living areas, bedrooms, hospitality |
Choosing a driver
Allow 14.4w for every metre of strip and add about 20% headroom. A full 10 metre run draws 144w, so it needs a 24v driver of at least 173w, which in practice means a 200w driver. A 5 metre run draws 72w and suits a 100w driver. For longer installations, split the strip into runs of 10 metres or less and feed each run separately.
Mounting and heat
We recommend mounting this strip in an aluminium profile, which draws heat away from the LEDs, protects the strip and extends its life. Choose a profile at least 11mm wide inside to suit the 10mm strip, and add a diffuser for the softest line of light. The 3M double sided tape holds it in place.
IP20 rated for dry indoor locations only.
