* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
RGB side bend neon LED strip, 14.4w per metre, IP67
This colour changing neon flex packs 336 LEDs per metre behind a diffused face, so it glows in any colour you choose without visible dots. The slim side bend profile follows horizontal curves, ideal for detailed outlines and creative layouts.
It is a great fit for signage, bars, entertainment areas, pool and garden features and architectural highlights that need colour. The IP67 rated build copes with outdoor and wet areas, and it is sold per metre or as a 20 metre roll.
Key features
- Full RGB colour changing
- 336 LEDs per metre behind a diffused face
- 14.4w per metre, 600 lumens per metre
- Side bend, follows horizontal curves
- 120° beam angle
- 6mm wide, 11mm high
- 24v DC
- IP67 rated
- 3 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Full colour changing |
24v driver plus an RGB controller |
Bars, entertainment areas, feature lighting |
| One fixed colour |
24v driver plus an RGB controller set to your colour |
Signage, brand colours, wayfinding |
Choosing a driver and controller
Allow 14.4w for every metre and add about 20% headroom. As a worked example, a 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For bigger installs, split the neon into separate runs, each with its own feed. Your RGB controller must also be rated for the full load of the run. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors, use a weatherproof IP66 or IP67 driver and keep the controller under cover.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with mounting clips or a mounting channel. This is a side bend neon, designed to follow horizontal curves, so plan your shapes around that bend direction rather than twisting it. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
