* If you require custom cut lengths please specify measurements in the order notes at checkout.
* Custom cut LED strip is sold per metre. Each cut is rounded up to the metre, e.g. 2 x 500mm is charged as 2 metres. To avoid delays, round each cut length up to the metre.
* All custom cut strip lighting is non refundable for change of mind.
Neon LED strip, 14.4w per metre, 3000k, IP67
This warm white neon flex gives a soft, continuous glow with 140 LEDs per metre hidden behind a diffused silicone face. It is slim at 6.5mm wide, so it can trace outlines, edges and shapes that a flat strip in a profile cannot follow.
The 3000k colour suits gardens, outdoor living, feature walls and hospitality signage where you want warmth rather than glare. It is IP67 rated, comes with four mounting clips per metre and is sold per metre or as a 20 metre roll.
Key features
- 14.4w per metre, 600 lumens per metre
- 140 x 2835 LEDs per metre behind a silicone diffuser
- 3000k warm white, CRI over 80
- 120° beam angle
- 6.5mm wide, 11mm high (not including end caps)
- Cut points every 50mm
- 24v DC, maximum 5 metre run, dimmable
- Four mounting clips supplied per metre
- IP67 rated
- 3 year replacement warranty
Colour temperature and output
| Colour temperature |
Output per metre |
Best for |
| 3000k Warm White |
600 lumens |
Gardens, outdoor living, signage, hospitality |
Choosing a driver
Allow 14.4w for every metre and add about 20% headroom. A full 5 metre run draws 72w, so it needs a 24v driver of at least 87w, which in practice means a 100w driver. For longer installations, split the neon into runs of 5 metres or less and feed each run separately. The 20 metre roll is supplied as one reel, so plan your runs before cutting. Outdoors or in wet areas, use a weatherproof IP66 or IP67 driver or keep the driver under cover. To dim the neon, pair it with a dimmable 24v driver and a compatible dimmer.
Mounting and outdoor use
Neon flex does not need an aluminium profile. Fix it with the supplied mounting clips, four per metre, or a mounting channel. Bend it gently and avoid kinking it. Every cut end must be resealed with an end cap and silicone to keep the IP67 rating, and any outdoor joins should be made in a waterproof connector or junction box.
IP67 rated for outdoor use.
