Smart tunable white COB LED strip kit, 2 or 5 metres
This Pixie smart kit from SAL lets you set the light anywhere from warm 2700k to daylight 6500k and dim it from your phone with the Pixie Plus app or a Pixie secondary device. It remembers your last dimming level, so it comes back on just how you left it.
Pre wired and plug and play, it is a simple way to add smart, tunable light to a home theatre, bar, kitchen or bedroom. The COB strip gives an even, stable line of light and CRI 90 keeps colours natural.
Key features
- Tunable white, 2700k to 6500k
- Smart control by Pixie Plus app or Pixie secondary device
- Dimmable, with dimming memory
- COB strip, 544 LEDs per metre
- CRI 90
- 6w per metre
- 115° beam angle
- Cut points every 30mm
- 10mm wide, 2mm high
- IP20
- 1 year warranty
Colour options
| How you run it |
What you need |
Best for |
| Warm white, around 2700k |
Pixie Plus app or Pixie secondary device |
Home theatres, bedrooms, relaxing |
| Daylight, up to 6500k |
Pixie Plus app or Pixie secondary device |
Kitchens, task lighting, workspaces |
| Dimmed |
Pixie Plus app or Pixie secondary device |
Bars, mood lighting, night light |
What's in the kit
- Pre wired tunable white COB strip in 2 or 5 metres
- Plug and play driver, the Pixie master device for the system
The 2 metre kit draws 12w and the 5 metre kit 30w. The strip can be cut every 30mm; if you cut away more than half the kit length, check the remaining load against the driver.
Mounting and heat
A heat sink is required, so mount the strip in an aluminium profile to draw heat away, protect it and extend its life. Choose a profile at least 11mm wide inside to suit the 10mm strip, and add a diffuser for a soft, even line.
IP20 rated for dry indoor locations only.
