Seker exterior LED bollard lights in dark grey powder-coated aluminium, available in small, medium, and large sizes.

SEKER Exterior LED Bollard Light in Dark Grey (Small/Medium/Large)

Name: SEKER Exterior LED Bollard Light in Dark Grey (Small/Medium/Large)
Brand: CLA Lighting
SKU: SEKER1
Price: 257.37 NZD
Availability: InStock
Rating: 3.0 (1 reviews)

$257.37 $323.53

Specifications:
• Input voltage: 100,240v AC 50/60Hz
• Inbuilt driver output: 18,42v
• Driver input current: 0.064A
• Driver output current: 300mA
• Inrush current: 1.2A
• Housing: powder coated aluminium
• Heatsink & mounting bracket: aluminium
• LED chip: 1pc 7070
• Power factor: >0.5
• Ambient Temp: ,20 to 50°C
• Suitable for 2,way switching
• Not for use inground

Warranty:
3 years replacement warranty

Note: To maintain the IP rating please use circular cable in junction. For parallel connector we recommend using an appropriate IP68 connector (CLA Connector: CONN002)

Size	Description	Colour Temperature	Lumens	Wattage	CRI	Beam Angle	Dimmable	Length	Width	IP Rating
Small	Small LED Bollard in Dark Grey	3000k	530lm	13w	80	253.9°	No	300mm	152mm	IP65
Medium	Medium LED Bollard in Dark Grey	3000k	530lm	13w	80	253.9°	No	500mm	152mm	IP65
Large	Large LED Bollard in Dark Grey	3000k	530lm	13w	80	253.9°	No	800mm	152mm	IP65

3 years warranty for extra peace of mind

Water & dust rated IP65; fully dust-tight and protected against low-pressure water jets from any direction.

Water & dust rated IP68; fully dust-tight and protected against continuous immersion in under water.

3.0

Rated 3.0 out of 5 stars

Based on 1 review

0%would recommend this product

Product QualityRated 3.0 on a scale of 1 to 5

Delivery SpeedRated 5.0 on a scale of 1 to 5

Overall ExperienceRated 3.0 on a scale of 1 to 5

Open Okendo Reviews in a new window

Write a Review (Opens in a new window)

1 review

Sort

DS
derek s.
Verified Buyer
Reviewing
SEKER Exterior LED Bollard Light in Dark Grey (Small/Medium/Large)
Age Range 55 - 64
Rated 3 out of 5 stars
18 hours ago
Bolland Light
I like to look of the lights ...we installed 6 a few years ago ..we have replaced 3 I think due to water egress up and into the light fitting. we dismantled the replacements and the existing lights reassembled sealing the legs with silicon in an attempt to remedy the problem. I dont mind needing to do this however not for something costing as much as these do. I will likely take a hit and replace all lights if another fails with another style hopefully more fit for purpose
Was this helpful?