Havit Commerical is a premium range of commercial-grade lighting. They are primarily used for larger scale and custom projects and, as such, need to be quoted. Please hit the enquire for price button with quantities and products for your project and we will email you a personalised quotation.
Features:
- Adjustable round inground uplighter
- Stainless steel 316 marine grade cover
- 15° Tilt control on face of fitting
- Beam angle: 30°
- Trafficable to 1000kg
- Flush tempered glass
- Face diameter: ø180mm
- Installation depth needed: 200mm
- Cut out not using plastic canister: 160mm
- Cut out using plastic canister: 171mm
- IP Rating: IP67
- IK Rating: IK10
- 24v DC Built in 13.5w LED CREE
- Dimmable: No
- CRI: RA >80
- NOTE: adequate drainage must be allowed
- 5 years replacement warranty
| Order Code |
Colour Temperature |
Lumens |
| HCP-251130 |
3000k
4000k
5500k |
824lm
916lm
841lm
|
|
|
|
Choosing a driver
This inground light runs on 24v DC, so it needs a 24v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 13.5w for each inground light and add about 20% headroom. 3 inground lights draw 40.5w, so they need a 24v driver of at least 49w, which in practice means a 60w driver.
| 24v driver size |
Maximum inground lights |
| 30w |
1 |
| 60w |
3 |
| 100w |
6 |
| 150w |
9 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 24v driver and mount it above ground, clear of garden beds and pooling water.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
