The Drique Aluminium CCT 5 Light LED Bollard Spike Light Kit offers a complete and flexible outdoor lighting solution designed for modern landscapes. Made from durable aluminum with a black poly powder-coated finish, these sleek bollard lights are both stylish and weather-resistant. The adjustable CCT range (3000K–5500K) allows you to fine-tune the colour temperature from warm to cool white, while smart control options via remote or TUYA app provide effortless operation. Supplied with interchangeable short and long Perspex lenses, this kit combines performance, durability, and convenience in one package.
Can add an additional 5x Lights to existing Driver and Controller.
Choosing a driver
The 24v DC version runs on low voltage and needs a 24v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.
Each spike light draws 5 x 1w, so allow 5w per spike light and add about 20% headroom. 10 spike lights draw 50w, so they need a 60w 24v driver.
| 24v driver size |
Maximum spike lights |
| 30w |
5 |
| 60w |
10 |
| 100w |
16 |
| 150w |
25 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 24v driver and mount it above ground, clear of garden beds and pooling water.
To dim, pair it with a dimmable 24v driver and a compatible dimmer.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
