The Drique Aluminium CCT LED Bollard Spike Light is designed as an additional fitting for the Drique 5 Light Kit, offering flexible expansion for outdoor lighting projects. Built from durable aluminum with a black poly powder-coated finish, it delivers both style and resilience in any landscape. The adjustable CCT range (3000K–5500K) allows for customisable lighting from warm to cool tones, while the supplied short and long Perspex lenses provide versatile light diffusion options. With its sleek 600mm profile and IP65 weather rating, it’s a reliable and elegant choice for gardens, pathways, and outdoor spaces.
Must be used with suitable 24v DC LED driver.
Choosing a driver
This spike light runs on 24v DC, so it needs a 24v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 1w for each spike light and add about 20% headroom. 10 spike lights draw 10w, so they need a 24v driver of at least 12w, which in practice means a 30w driver.
| 24v driver size |
Maximum spike lights |
| 30w |
25 |
| 60w |
50 |
| 100w |
83 |
| 150w |
125 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 24v driver and mount it above ground, clear of garden beds and pooling water.
To dim, pair it with a dimmable 24v driver and a compatible dimmer.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
