Illuminate gardens, pathways, and architectural features with the HCP-242183 12W Tri-Colour LED Spike Light. The matte-black powder-coated aluminium housing pairs IP65 weatherproofing with IK10 impact resistance, while three switchable colour temperatures (3000K / 4000K / 5500K) and a focused 30° beam angle give you total control over the look and feel of any outdoor commercial space. Surface-mount or spike-mount, run on 24V DC, and backed by a 5-year replacement warranty.
- Surface Mounted or Spike mounted Spot light
- Aluminium poly powder coated black
- 30° Beam angle
- TRI Colour - 3000k, 4000k, 5500k
- IP rating: IP65
- IK Rating: IK10
- Input voltage: 24v DC
- Built in 12w LED
- 5 years replacement warranty
Must be used with a suitable 24v DC LED Driver.
Product Details
| Part Number |
Colour Temp |
Lumens |
Included LED |
Input Voltage |
| HCP-242183 |
3000k / 4000k / 5500k |
480lm / 660lm / 545lm |
12w 24v DC Built in LED |
24v DC |
Choosing a driver
This spike light runs on 24v DC, so it needs a 24v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 12w for each spike light and add about 20% headroom. 4 spike lights draw 48w, so they need a 24v driver of at least 58w, which in practice means a 60w driver.
| 24v driver size |
Maximum spike lights |
| 30w |
2 |
| 60w |
4 |
| 100w |
6 |
| 150w |
10 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 24v driver and mount it above ground, clear of garden beds and pooling water.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
