Description:
- Highlite Bollard Light
- Aluminium Poly Powder Coated Black
- High-Grade Perspex Lens
- 600mm, 1000mm height
- TRI Colour
- 3000k, 4000k + 5500k
- IP rating: IP65
- IK Rating: IK08
- Input Power: 24v DC
- Built-in 18w or 24w LED (choose wattage on PCB)
- 3 Years Replacement Warranty
- 24v DC Model must be used with a suitable 24v DC LED Drive
| Order Code |
Size |
Colour Temp |
Lumens |
Input Voltage |
Included Globes |
Height |
Diameter |
| HV1625T-BLK-24V |
Small |
3000k
4000k
5500k |
1900lm
1970lm
2040lm |
24v DC |
Built in 24w LED |
600mm |
ø120mm |
| HV1626T-BLK-24V |
Large |
3000k
4000k
5500k |
1900lm
1970lm
2040lm |
24v DC |
Built in 24w LED |
1000mm |
ø120mm |
Choosing a driver
This bollard runs on 24v DC, so it needs a 24v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 24w for each bollard and add about 20% headroom. 2 bollards draw 48w, so they need a 24v driver of at least 58w, which in practice means a 60w driver.
| 24v driver size |
Maximum bollards |
| 30w |
1 |
| 60w |
2 |
| 100w |
3 |
| 150w |
5 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 24v driver and mount it above ground, clear of garden beds and pooling water.
