Features:
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
- Can be either used built-in or independent with clip-on strain-relief
- The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging
- one4all interface enables different dimming options
- Dimming range 1 to 100 %
- No additional external dimmer is needed
- Suitable for emergency escape lighting systems acc. to EN 50172
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Typical applications
- Cove lighting, facade accent lighting, ceiling integration
Technical details
- 24v, 18w
- Small cross section
- Push terminals for simple wiring
Interfaces
- one4all (DALI, DSI, switchDIM, corridorFUNCTION)
- Terminal blocks: 45° push terminals
System solution
- Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
- Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
- In connection with Flex accessories wire to PCB plug
- Test the function of third party light sources before use at low dimming levels to ensure the dimming function works perfectly
Specifications:
- Rated supply voltage: 220 , 240v
- AC voltage range: 198 , 264v
- DC voltage range: 176 , 280v
- Mains frequency: 0 / 50 / 60 Hz
- Overvoltage protection: 320v AC, 48 h
- Typ. rated current (at 230 V, 50 Hz, full load) (1): 105 mA
- Typ. current (220 V, 0 Hz, full load, 15 % dimming level): 24 mA
- Leakage current (at 230 V, 50 Hz, full load) (1): < 0.5 mA
- Typ. input current in no-load operation: < 20 mA
- In-rush current (peak / duration): 10.8 A / 225 µs
- Max. input power: 22w
- Typ. power consumption on stand-by: < 0.5 W
- Typ. input power in no-load operation: < 2.5 W
- Typ. efficiency (at 230 V, 50 Hz, full load): 84 %
- λ (at 230 V, 50 Hz, full load) (1): 0.95
- THD (at 230 V, 50 Hz, full load) (1): < 8 %
- Starting time (at 230 V, 50 Hz, full load) (2): < 0.65 s
- Starting time (DC mode) (2): < 0.32 s
- Switchover time (AC/DC): < 0.32 s
- Turn off time (at 230 V, 50 Hz, full load): < 0.05 s
- Output voltage tolerance: ± 1 V
- Output LF voltage ripple (< 120 Hz): ± 5 %
- Output P_ST_LM (at full load): ≤ 1
- Output SVM (at full load): ≤ 0.4
- Max. output voltage (U-OUT): 60v
- Dimming range: 1 , 100 %
- PWM frequency: ~ 1000 Hz
- Mains surge capability (between L - N): 1 kV
- Mains surge capability (between L/N - PE): 2 kV
- IP Rating: IP20
Dimensions:
- Length: 130mm
- Width: 43mm
- Height: 30mm
| Load |
Output current |
Output voltage |
Typ. current consumption |
Max. output power
(at full load) |
Max. output power |
Typ. power consumption
(at full load) |
Ambient temperature ta |
tc point max |
| 15.0 % |
113.0 mA |
24.0 V |
30 mA |
2.7 W |
2.7 W |
5 W |
-25 , 60 °C |
75.0 °C |
| 20.0 % |
150.0 mA |
24.0 V |
33 mA |
3.6 W |
3.6 W |
5.7 W |
-25 , 60 °C |
75.0 °C |
| 30.0 % |
225.0 mA |
24.0 V |
40 mA |
5.4 W |
5.4 W |
7.7 W |
-25 , 60 °C |
75.0 °C |
| 40.0 % |
300.0 mA |
24.0 V |
48 mA |
7.2 W |
7.2 W |
9.5 W |
-25 , 60 °C |
75.0 °C |
| 50.0 % |
375.0 mA |
24.0 V |
55 mA |
9 W |
9 W |
11.6 W |
-25 , 60 °C |
75.0 °C |
| 60.0 % |
450.0 mA |
24.0 V |
63 mA |
10.8 W |
10.8 W |
13.3 W |
-25 , 60 °C |
75.0 °C |
| 70.0 % |
525.0 mA |
24.0 V |
71 mA |
12.6 W |
12.6 W |
15.5 W |
-25 , 55 °C |
75.0 °C |
| 80.0 % |
600.0 mA |
24.0 V |
79 mA |
14.4 W |
14.4 W |
17.2 W |
-25 , 50 °C |
70.0 °C |
| 90.0 % |
675.0 mA |
24.0 V |
87 mA |
16.2 W |
16.2 W |
19.2 W |
-25 , 50 °C |
70.0 °C |
| 100.0 % |
750.0 mA |
24.0 V |
95 mA |
18 W |
18 W |
21.3 W |
-25 , 50 °C |
70.0 °C |
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
