Specifications:
- Colour: Antique Brass, Black, Brass, Copper, Stainless Steel
- Material: 316 Stainless Steel, Brass, Copper
- IP Rating: IP65
- Globe Type: LED
- Globe Base: MR11
- Wattage: 1x 3w
- Input Voltage: 12v DC
- Colour Temperature: 3000k, 4000k
- CRI: >80
- Dimmable: No
- Beam Angle: 60°
- Warranty: 3 Years replacement
Must Be Used With Suitable 12v DC LED Driver
Dimension:
With Canister
- Cut Out: ø55mm
- Height: 85mm
Without Canister
- Cut Out: ø42mm
- Height: 80mm
| Part Number |
Colour |
Colour Temperature |
Lumens |
| HV2899NW-AB |
Antique Brass |
3000k
4000k |
270lm
300lm |
| HV2899NW-BLK |
Black |
3000k
4000k |
270lm
300lm |
| HV2899NW-BR |
Brass |
3000k
4000k |
270lm
300lm |
| HV2899NW-CP |
Copper |
3000k
4000k |
270lm
300lm |
| HV2899NW-SS316 |
316 Stainless Steel |
3000k
4000k |
270lm
300lm |
Choosing a driver
This light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 3w for each light and add about 20% headroom. 10 lights draw 30w, so they need a 12v driver of at least 36w, which in practice means a 60w driver.
| 12v driver size |
Maximum lights |
| 30w |
8 |
| 60w |
16 |
| 100w |
27 |
| 150w |
41 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
