The Madna Bollard Spike Light combines contemporary design with reliable outdoor performance. Made from aluminum with a durable black poly powder-coated finish, it’s built to withstand outdoor conditions while adding a refined touch to your landscape. The integrated 3W tri-colour LED offers selectable colour temperatures,warm, neutral, or cool white,allowing you to create the perfect lighting ambiance. Ideal for pathways, driveways, and garden highlights, this 600mm bollard delivers efficient, long-lasting illumination.
Choosing a driver
This spike light runs on 24v DC, so it needs a 24v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 3w for each spike light and add about 20% headroom. 10 spike lights draw 30w, so they need a 24v driver of at least 36w, which in practice means a 60w driver.
| 24v driver size |
Maximum spike lights |
| 30w |
8 |
| 60w |
16 |
| 100w |
27 |
| 150w |
41 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 24v driver and mount it above ground, clear of garden beds and pooling water.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
