Maro up and down LED wall lights in black and white powder-coated aluminium with a curved, compact design.

Maro Up and Down LED Wall Light CCT 4x 1w in Black or White Havit Lighting - HV3695T

$80.89 $96.47

Description:

Up & down LED wall light
Aluminium Poly Powder Coated Black or White
TRI Colour
IP rating: IP54
Input Voltage: Available in either 240v AC or 12v DC
Built in 4x 1w LED
3 years replacement warranty

12v model must be used with suitable 12v DC LED driver

Dimension:

Length: 120mm
Height: 80mm
Width: 42mm

Part Number	Colour	Colour Temperature	Lumens	Input Voltage
HV3695T-BLK-240V	Black	3000k 4000k 5500k	2x 85lm 2x 90lm 2x 90lm	240v AC
HV3695T-BLK-12V	Black	3000k 4000k 5500k	2x 85lm 2x 90lm 2x 90lm	12v DC
HV3695T-WHT-240V	White	3000k 4000k 5500k	2x 85lm 2x 90lm 2x 90lm	240v AC
HV3695T-WHT-12V	White	3000k 4000k 5500k	2x 85lm 2x 90lm 2x 90lm	12v DC

Choosing a driver

The 12v DC version runs on low voltage and needs a 12v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.

Each light draws 4 x 1w, so allow 4w per light and add about 20% headroom. 10 lights draw 40w, so they need a 12v driver of at least 48w, which in practice means a 60w driver.

12v driver size	Maximum lights
30w	6
60w	12
100w	20
150w	31

For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.

Indoors, an indoor 12v driver mounted in the ceiling space works well. If the light is going outdoors or under eaves, use a weatherproof IP66 12v driver.

3 years warranty for extra peace of mind

Colour temperature changing technology to suit your space

Water & dust rated; IP54 is suitable for wet areas, including outdoor environments.