Features:
- Recessed Step Light With Eyelid
- Solid Copper Face
- Stainless Steel 316 Body
- Tempered Glass
- Dimmable
- Tri Colour
- 3000k, 4000k, 5500k
- IP rating: IP67
- Input voltage: 12v DC
- Built in 1w LED
- 3 Years Replacement Warranty
Specifications:
- Colour: Copper
- Material: Solid Copper
- Globe Type: LED
- Globe Included: Yes
- Wattage (max): 1w
- Colour Temperature: CCT(3000k, 4000k, 5500k)
- Lumens: 80lm, 90lm, 85lm
- IP Rating: IP67
- IK Rating: IK10
- CRI: >80
- Dimmable: Yes
- Beam Angle: 30°
- Lamp Expectancy: <30,000hrs
- Warranty: 3 Years replacement*
Must Be Used With Suitable 12v DC LED Driver
Dimensions:
Without Canister
- Cut Out: ø38mm
- Diameter: ø53mm
- Cable Length: 300mm
With Canister
- Cut Out: ø46mm
- Diameter: ø53mm
- Cable Length: 300mm
Choosing a driver
This light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 1w for each light and add about 20% headroom. 10 lights draw 10w, so they need a 12v driver of at least 12w, which in practice means a 30w driver.
| 12v driver size |
Maximum lights |
| 30w |
25 |
| 60w |
50 |
| 100w |
83 |
| 150w |
125 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
To dim, pair it with a dimmable 12v driver and a compatible dimmer.
