The Nella surface mounted LED downlight delivers wide, even illumination in a clean and contemporary design. With a broad 120° beam angle, it is ideal for general lighting in residential and commercial spaces. The powder-coated aluminium finish provides durability while maintaining a modern look. Tri-colour selection and optional dimming on the 240V model allow you to easily tailor the lighting to suit your environment.
12v model must be used with a suitable 12v DC LED Driver.
Choosing a driver
The 12v DC version runs on low voltage and needs a 12v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.
Allow 18w for each downlight and add about 20% headroom. 2 downlights draw 36w, so they need a 12v driver of at least 44w, which in practice means a 60w driver.
| 12v driver size |
Maximum downlights |
| 30w |
1 |
| 60w |
2 |
| 100w |
4 |
| 150w |
6 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Indoors, an indoor 12v driver mounted in the ceiling space works well. If the light is going outdoors or under eaves, use a weatherproof IP66 12v driver.
💡 Not sure how many you need? Try our free downlight calculator to work out quantity and spacing for your room.