The Nella surface mounted LED downlight delivers a sleek, contemporary lighting solution with reliable performance. Finished in durable powder-coated aluminium, it suits both residential and commercial interiors. The included honeycomb lens helps minimise glare while maintaining a focused light output. With selectable colour temperatures and dimming available on the 240V model, it offers flexibility for a wide range of applications.
12v model must be used with a suitable 12v DC LED Driver
Choosing a driver
The 12v DC version runs on low voltage and needs a 12v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.
Allow 12w for each downlight and add about 20% headroom. 4 downlights draw 48w, so they need a 12v driver of at least 58w, which in practice means a 60w driver.
| 12v driver size |
Maximum downlights |
| 30w |
2 |
| 60w |
4 |
| 100w |
6 |
| 150w |
10 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Indoors, an indoor 12v driver mounted in the ceiling space works well. If the light is going outdoors or under eaves, use a weatherproof IP66 12v driver.
To dim, pair it with a dimmable 12v driver and a compatible dimmer.
💡 Not sure how many you need? Try our free downlight calculator to work out quantity and spacing for your room.