The Nella Surface Mounted LED Downlight is a modern and versatile lighting solution designed to suit a wide range of indoor and outdoor spaces. Its aluminium body with a powder-coated black finish offers a clean architectural look that complements contemporary interiors and exterior areas. The included honeycomb lens helps minimise glare while maintaining a focused and comfortable light output. With five selectable colour temperatures, you can easily tailor the lighting to match the environment or desired atmosphere. The IP65 rating makes it suitable for bathrooms, alfresco areas, and other moisture-prone installations.
12v model must be used with a suitable 12v DC LED Driver.
Choosing a driver
The 12v DC version runs on low voltage and needs a 12v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.
Allow 12w for each downlight and add about 20% headroom. 4 downlights draw 48w, so they need a 12v driver of at least 58w, which in practice means a 60w driver.
| 12v driver size |
Maximum downlights |
| 30w |
2 |
| 60w |
4 |
| 100w |
6 |
| 150w |
10 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
💡 Not sure how many you need? Try our free downlight calculator to work out quantity and spacing for your room.
