Description:
Must be used with suitable 12v DC LED driver
Specifications:
Dimensions:
This pond light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 5w for each pond light and add about 20% headroom. 10 pond lights draw 50w, so they need a 60w 12v driver.
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
Easy to install and does the job well