The Patra Outdoor LED Wall Light is a compact and durable surface-mounted fixture designed to enhance modern exteriors. Crafted from solid brass or 316 stainless steel, it’s available in a range of finishes including antique brass, black, and white. With tri-colour switchable light and dimming capability, it offers versatility and long-lasting performance in all weather conditions.
Must be used with a suitable 12v DC LED driver
Choosing a driver
This light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 1.5w for each light and add about 20% headroom. 10 lights draw 15w, so they need a 12v driver of at least 18w, which in practice means a 30w driver.
| 12v driver size |
Maximum lights |
| 30w |
16 |
| 60w |
33 |
| 100w |
55 |
| 150w |
83 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
To dim, pair it with a dimmable 12v driver and a compatible dimmer.
