Features:
- Single Adjustable Mini Spike or Surface Mounted Spotlight
- Aluminium Poly Powder Coated Black, White
- 90° Tilt
- Dimmable
- 1m Reinforced Cable
- TRI Colour
- 3000k, 4000k, 5500k
- IP rating: IP65
- Input Voltage: 12V DC
- Built in 0.5w LED
- 3 Years Replacement Warranty
Must Be Used With Suitable 12v DC LED Driver.
Specifications:
- Colour: Black, White
- Material: Aluminium
- Diffuser Type: Clear Glass
- Globe Type: LED
- Globe Included: Yes
- Wattage (max): 1x 0.5w
- Input Voltage: 12v DC
- Colour Temperature: CCT (3000k, 4000k, 5500k)
- Lumens: 25lm, 30lm, 27lm
- IP Rating: IP65
- CRI: >80
- Dimmable: Yes
- IK Rating: IK08
- Beam Angle: 36°
- Lamp Expectancy: >30,000hrs
- Installation Type: Ground - Spike or Surface Mounted
- Warranty: 3 Years Replacement*
Dimensions:
- Height: 140mm
- Width: 16mm
- Cable Length: 1000mm
Choosing a driver
This spike light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 0.5w for each spike light and add about 20% headroom. 10 spike lights draw 5w, so they need a 12v driver of at least 6w, which in practice means a 30w driver.
| 12v driver size |
Maximum spike lights |
| 30w |
50 |
| 60w |
100 |
| 100w |
166 |
| 150w |
250 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
To dim, pair it with a dimmable 12v driver and a compatible dimmer.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
