The Split 316 Stainless Steel 12W RGBW LED Inground Light is designed for strength, durability, and versatile outdoor lighting. With its marine grade stainless steel body and cover, it’s built to handle tough environments while delivering vibrant colour-changing illumination. The recessed uplighter design gives a sleek, flush finish, while the anti-glare honeycomb louvre ensures a softer, more comfortable light. Perfect for driveways, pathways, and landscaped areas, this fitting is both stylish and built to last.
Choosing a driver
This inground light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 12w for each inground light and add about 20% headroom. 4 inground lights draw 48w, so they need a 12v driver of at least 58w, which in practice means a 60w driver.
| 12v driver size |
Maximum inground lights |
| 30w |
2 |
| 60w |
4 |
| 100w |
6 |
| 150w |
10 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
