Features:
Aluminium Black
HV1459T-BLK
Antique Brass
HV1459T-AB
Stainless Steel
HV1459T-SS316
This spike light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 7w for each spike light and add about 20% headroom. 7 spike lights draw 49w, so they need a 12v driver of at least 59w, which in practice means a 60w driver.
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
Turned out perfectly, well built lights and perfect illumination on our driveway
Happy with these lights - second lot we’ve bough. Easy to use website & good service, lights delivered promptly.