The Stellato Bollard Spike Light is a sleek and practical outdoor lighting solution, designed to enhance pathways and landscaped areas with ease. Standing at 1000mm tall, it features a durable powder-coated aluminium construction in a modern black finish. The integrated LED offers TRI-colour functionality, allowing you to select between warm, neutral, or cool white light to suit your space. With an IP65 rating and low-voltage operation, it’s built for reliable performance in outdoor environments.
Choosing a driver
This spike light runs on 24v DC, so it needs a 24v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 3w for each spike light and add about 20% headroom. 10 spike lights draw 30w, so they need a 24v driver of at least 36w, which in practice means a 60w driver.
| 24v driver size |
Maximum spike lights |
| 30w |
8 |
| 60w |
16 |
| 100w |
27 |
| 150w |
41 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 24v driver and mount it above ground, clear of garden beds and pooling water.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
