Description:
- Deck Light
- Stainless Steel 316 Marine Grade Face
- Aluminium Body
- Traffic Resistant Lens
- Dimmable
- 1.5m Cable Length
- IP rating: IP67
- Input Voltage: 12v DC
- Built in 3w LED
- Not Suitable For Inground Installation
- 3 Years Replacement Warranty
Dimensions:
- Diameter: ø64mm
- Height: 93mm
- Cut Out: ø50mm
Must Be Used With Suitable 12v DC LED Driver
| Order Code |
Colour Temperature
|
Lumens |
|
HV2860T-SS316
|
3000k
4000k
5500k |
240lm
260lm
250lm |
Choosing a driver
This deck light runs on 12v DC, so it needs a 12v LED driver (sometimes called a transformer). It cannot connect straight to 240v mains. The driver is wired in by a licensed electrician.
Allow 3w for each deck light and add about 20% headroom. 10 deck lights draw 30w, so they need a 12v driver of at least 36w, which in practice means a 60w driver.
| 12v driver size |
Maximum deck lights |
| 30w |
8 |
| 60w |
16 |
| 100w |
27 |
| 150w |
41 |
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with the voltage drop calculator below.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
To dim, pair it with a dimmable 12v driver and a compatible dimmer.
Planning your install? Use our voltage drop calculator to choose the right cable size for your run and keep every light at full brightness.
