12v model must be used with suitable 12v DC LED driver
3000k
4000k
5500k
2x 200-560lm
2x 255-595lm
2x 270-630lm
2x 3/5/7w
240v
GU10
2x 270lm
2x 285lm
2x 300lm
2x 5w
12v DC
MR16
The 12v DC version runs on low voltage and needs a 12v LED driver, installed by a licensed electrician. The 240v version wires straight to mains and does not need a driver.
Each light draws 2 x 5w, so allow 10w per light and add about 20% headroom. 5 lights draw 50w, so they need a 60w 12v driver.
For bigger installs, split the lights across two or more drivers and place each driver close to its group. Long cable runs at low voltage lose brightness at the far end, so check your cable size with our voltage drop calculator.
Outdoors, use a weatherproof IP66 12v driver and mount it above ground, clear of garden beds and pooling water.
